English verison N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 140MHz - 2.7GHz resistance/impedance/SWR

English verison N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 140MHz - 2.7GHz resistance/impedance/SWR

CLEARANCE SALE

Save US $23.8


  • VendorHOT SALE RADIO Store
  • Volume Retail sales4 piece
  • List PriceUS $170.00piece
  • SaveUS $23.8piece14% off
  • Your PriceUS $146.20piece
  • ShippingFree Shipping
  • Product Rating4.9(4)
253.95146.20-254.28237.36 English verison N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 140MHz - 2.7GHz resistance/impedance/SWR N1201SA GSM Antenna analyzer Specifications Frequency 140MHz~2700MHz Spacing 1kHz Display 2.4inch TFT Pixel 320×240(QVGA) Battery 2000mAH(7.4Wh) Power dissipation <1.5W Charging current 400mA Charging port USB(For charging only) Auto Power Off Adjustable(Always on,5mins~60min) Measure facts resistance/reactance/SWR/s11 Resolution ratio 4bits effective digits Frequency accuracy ±5ppm Connector SMA-K Measuring range impedance 0.1Ω~1000Ω(Absolute value of impedance) SWR 1.000~65 s11(dB) 0dB~-60dB       Error (single point measurement) impedance <Absolute value of impedance×3%±0.1Ω(Z<200Ω,<1.5GHz) SWR <Effective reading×10%±0.1 s11 (dB/°)0.1 dB /5° (0dB~-10dB) 1 dB /10° (-10dB~-20dB) 5dB/20° (-20dB~-40dB) directivity <35dB(140MHz~2GHz After calibration) <30dB(2GHz~2.7GHz) Scan Points 280 output level -18dBm Working temperature 0~40 Atmospheric pressure 860hPa~1060hPa Dimension 120mm*86mm*30mm --------------------------------------------------------------------------------------------------------------------------------------------- Description

This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.

Startup and shutdown
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis.
CLEARANCE SALE Save US $23.8 and Discount 14% for English verison N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 140MHz - 2.7GHz resistance/impedance/SWR with Product Rating: 4.9 from Volume Retail sales: 4 and Your Price: US $146.20
You need to be sure that before you purchase a English verison N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 140MHz - 2.7GHz resistance/impedance/SWR you have already seen and read the description of the merchandise first. This way you could be sure that you are getting the proper product that may suit your needs. Since this English verison N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 140MHz - 2.7GHz resistance/impedance/SWR has good quality it is among the best sellers on the market now and many people are recommending the product to their friends and family. These days this product is really affordable for almost everyone and it’s a very good buy for the money. You don’t need cheaper products if it will only sabotage your work and will not provide you with the kind of quality that you need in the product. With the higher price you may be sure that your money is worth spending in this product.